 |
 |
FORMULATE YOUR SUCCESS
WITH
FORMULATED POLYMERS
|
|
|
|
 |
| News & Events :
|
|
| |
| FORMPOLY® modified Poly Phenylene Ether m-PPO Grades |
Over the years, FPL has established 400 grades in 10 engineering polymers mostly specialising in niche
compounds. FPL has approvals from various OEMs serving large sectors of industries with product reach
internationally.
FPL facilities are certifed to ISO 9001; ISO/TS 16949 and ISO 14001 quality systems. FPL combining a
strong technology base with application expertise, design and manufacture Engineering Plastic from
relatively inexpensive compounds to sophisticated high end engineering plastic compounds.
|
| GRADE |
DESCRIPTION |
CHARACTERISTICS |
APPLICATIONS |
| Unfilled Grades |
| PPOGP35E |
General Purpose extrusion |
Controlled viscosity, uniform flow, good gauge control |
Sheets, profile extrusion parts |
| PPOGP30 |
General Purpose moulding |
Heat stabilized, nucleated for fast molding cycle with excellent molding and dimensional control |
Electrical appliances, Housing, Automotive Interior and Exterior Parts. Pump parts , Valve parts. Medical and Food contact applications |
| Extensions |
Prefix |
Suffix |
Description |
Special Characteristics |
| |
HH |
High Heat Grade |
Higher HDT and high heat performance |
| |
HF |
High Flow Grade |
For longer and thin parts |
| |
HS |
Heat Stabilized Grade |
For long high temp exposure parts |
| S |
|
Special formulation |
Customer specific |
| Glass Fiber Reinforced Grades |
PPOGF10
PPOGF20
PPOGF30
PPOGF40 |
10% Glass Fiber
20% Glass Fiber
30% Glass Fiber
40% Glass Fiber |
Multipurpose grade. Low warp and easy flow / moulding. Good dimensional stability. |
High heat applications, Automotive ignition, Pump housing / impellers, Electrical meter parts. Electrical parts; Water meter housing |
| Extensions |
Prefix |
Suffix |
Description |
Special Characteristics |
| |
PW |
Potable water certified meets IS 14997 water contact applications |
Submergible pump parts like Housing, impellers with RoHs compliance |
| |
HH |
High Heat grade |
Electrical and Electronics parts |
| |
T |
Increased toughness grade with higher impact |
Automobile applications where impact strength is required. |
| S |
|
Special formulation |
Customer specific |
| Flame Retardant Grades |
| PPOFR90V1 |
Unfilled FR meets UL94 V1 |
Moderate strength, easy flow, high gloss |
Selected grades are available with UL certification
Electrical / Electronics parts like TV parts deflection yokes, Bobbins, Audio / Video / Business machines parts, TV back plates.. |
| PPOFR90V0 |
Unfilled FR meets UL94 V0 |
Easy flow, good impact strength, low smoke |
PPOGF10FR
PPOGF20FR
PPOGF30FR |
Glass Fiber reinforced FR meets UL94 V0 |
Moderate mechanical strength with low warp molding. Good electrical properties with low moisture absorption |
| Extensions |
Prefix |
Suffix |
Description |
Special Characteristics |
| |
HH |
High heat |
Higher HDT / Vicat Temp |
| |
E |
Low viscosity for extrusion |
Good dimensional control |
| |
FH |
Halogen free system |
Meets REACH / RoHs compliance |
| |
P |
Phosphorus based system |
For selected applications |
| |
U |
UL certified |
Available with UL yellow card |
| S |
|
Special formulation |
Customer specific |
| Specialty Grades – PPE / Nylon alloy ( GT series) |
| PPOGT14 |
Unfilled |
High flexural modules / HDT |
For on line bake painting parts of auto, Cable clip, Petro caps |
| PPOGT74EC |
Unfilled electrically conductive |
Electro static painting grade. With surface resistivity of 102 ohms. Paint efficiency improves multifold |
For electro static painting of difficult contours. Fuel door , Front panel, Side cover of two wheeler |
| PPOGT10G |
10% Glass Fiber |
Low warp and easy flow. Easy moulding and dimensional stability |
Automotive under-hood stiffer parts, Pump Impellers for abrasive fluid, Housing |
| PPOGT20G |
20% Glass Fiber |
| PPOGT30G |
30% Glass Fiber |
| PPOGT20M |
20% Mineral |
Low warp, moderate strength |
Flat parts, circular parts with multi gate |
| Extensions |
Prefix |
Suffix |
Description |
Special Characteristics |
| |
T |
Higher toughness grade |
High impact strength |
| |
HH |
High heat grade |
Higher HDT and VICAT temperature |
| |
HF |
High Flow grade |
Flows extra length , fills thin sections |
| S |
P |
Special formulation |
Customer specific |
|
|
| |
In addition to above FPL have many other formulations for many end-use applications. FPL also has many
Application Specific grades and alloys / blends for many Specific requirements. May be some of them may
suit your requirements also. Call on us to know more about us and about our FORMPOLY® product range.
FPL offers the end-user industry, the designer and the processor with a wide range of plastic compounds
to meet every application.
FPL’s full range of service includes development assistance, custom formulations, product and application
guidance. |
| |
|
All FORMPOLY® products are in pellet form and offered in standard 25 Kg and 500 Kg moisture proof bags. MOQ for Produced for stock grades are based on packing size mentioned here, and for produced against order depends on the colour, polymer and the same provided by your nearest supply chain executive. |
| |
|
FORMPOLY® grades are designed and manufactured carefully to achieve easy flow, permit thin section moulding , fast solidification and best release property in case of injection moulding and uniform flow with excellent dimension stability in case of extrusion. FPL grades are process stabilised for easy processing under wide temperature range.
More details of processing can be seen in compact disc provided for each grade. Ask for assistance to nearest technical services staff to establish the processing and in case of difficulties.
|
| |
|
| MATERIAL SAFETY DATA SHEET |
|
MSDS for FORMPOLY® polymer groups are available. Ask for a copy or can be located in compact disc of
FORMPOLY® Product Data Sheet. |
|
|
| |
| |
|
|
|
|
 |
| Network |
57-60, SIDCO Industrial Estate,
Thirumazhisai, Chennai-600 124,
INDIA. |
 |
144/1 Patilvasti, Jambulkar Nagar
Hinjgwadi,
Pune-411 057,
INDIA. |
|
Rao Market,
Plot No. 5, 2nd Gali,
Sarhaul Village,
Sector 18,
Gurgaon-122 001,
INDIA. |
|
No.67/49,
4th Cross, Begur Road, Bommanhalli,
Bengaluru-560 068,
INDIA. |
|
|
|
© Copyright 2013 - Formulated Polymers Limited, All Rights Reserved. |
|
|
|
